Chair and legroom
Drawer units must not take away the space needed to sit and rise.
MMV Studio
Custom desks in Torrevieja
We can assist you inEspañolEnglishDeutschРусский
Furniture planned for the room you actually have
A made-to-measure desk in Torrevieja should be planned with the chair in place, not against an empty wall. You need room to move back, reachable sockets and a screen position that avoids constant window glare.
Designed for your space
A proposal that fits your space
We define dimensions, storage, finishes and fitting before manufacture so every decision suits the actual space and its use.
Screen and daylight
Test its direction against windows and existing light points.
Cables you can reach
Openings and access points let equipment change without dismantling the desk.
A working surface
Depth follows the monitor, keyboard and documents actually used.
Our process
From the first estimate to your final check
The measurements and the agreed specification turn an initial price range into a final quote. Design and project work are free when you commission us to make the furniture to that project.
A first price range
Photographs, rough sizes and your address let us discuss the scope. The figure remains provisional until we measure.
Survey at the property
We check the actual openings, services, wall lines and the route for bringing the pieces in.
Design where needed
If plans are needed, we develop them after the survey. The design and project are free when you commission us to make the furniture to that project.
The detailed quote
We set out the agreed layout, boards, fronts, fittings, delivery and any installation included in the order.
Your approval and deposit
You can check the full proposal before accepting it. Production begins after the agreed advance payment.
Workshop manufacture
The pieces are made to the approved measurements and specifications, with the agreed hardware prepared for fitting.
Delivery and fitting
We carry out the transport and installation specified in your order, then adjust the parts we have fitted.
Walk-through together
We test doors and drawers with you, record any outstanding details and close the job once the agreed result is confirmed.
Your project starts here
Tell me what you want to change at home.
I'm Lorena Peña. You don't need to know the technical name for the furniture. Describe the problem in your own words and add a photo if you can; I'll help you work out the next step.
No obligation. Rough measurements are enough to get started.
Solutions for your space
Start with the equipment: making it work
Tell us which equipment you use, how long you sit there and what you keep close. Two full workstations call for a different arrangement from an occasional laptop shelf.
Start with the equipment
Monitor, laptop or twin stations determine supports and sockets.
Keep files within reach
Place regular drawers and papers where you do not need to turn constantly.
Choose when to fold away
A folding desk frees floor space but needs a clear opening and a reason to use it.
Latest posts
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Configuration gallery
Examples of custom desks
Sixteen configurations showing different layouts, finishes and ways to integrate the furniture into a real room.
Oak beside a bedroom windowRaised drawers and a cable opening sit in the recess while the floor remains clear.
Wall-to-wall walnut topThe suspended board leaves legroom beneath shallow storage.
An L-shaped place to workScreen, mobile files and upper shelves share white and oak sections.
Curved executive tableRounded walnut edges enclose a wide surface and a concealed electrical route.
Two seats at one windowA central drawer unit divides a continuous desktop without a partition.
A height-changing desk by bookshelvesThe lifting frame needs space for knees and wiring in both positions.
Worktop around a columnTwo joined surfaces occupy either side of the obstruction with sockets nearby.
Office behind wardrobe doorsA flap forms the desk while shelves and small tools stay within the cabinet.
Sage green and oakFramed fronts and warm metal pulls suit a more traditional room.
Dressing table used for workClose the mirror into the curved top to recover the work surface.
Blue for a young studentGentle edges and roomy drawers keep books and supplies within reach.
Desktop beneath a pitched roofThe usable work area stays clear, while low drawers fill the shorter section.
Solid oak on a metal frameA live edge gives the visible surface character; a cable tray handles daily use.
Desk pulled from a cupboardWhen the surface folds away, laptop and papers can be stored behind it.
Blue and cane near the coastAn aired front and reduced depth give the work corner a lighter look.
Two people facing one anotherShared wiring runs between the seats; filing belongs at either end.
Three ways to approach the specification
Where to focus the budget
These are priorities to discuss, rather than fixed packages or price bands.
Everyday function01
Start with the essentials
Give priority to a workable layout, useful capacity and suitable hardware.
- A clearly defined scope
- A focused choice of finishes
- Storage arranged for daily use
Personal detail02
Refine the visible finish
Compare additional finishes and internal accessories where they improve the result.
- Coordinated visible surfaces
- Accessories chosen for a purpose
- Samples for the finishes that matter
Special requirements03
Resolve the unusual details
Allow for additional design or workshop work when geometry, equipment or junctions require it.
- Detailed technical information
- Specific fixings or mechanisms
- Coordination with the relevant trades
A detailed quotation
The information behind a useful quotation
You can start with rough dimensions. We will tell you what needs to be checked before a final specification is prepared.
The space
Photographs and approximate dimensions show the available area and nearby doors or services.
Your priorities
Explain what you need the furniture to do and what is missing now.
Your references
Send a few examples and point out the details you like.
Timing and access
Tell us the address, intended date and any work taking place before fitting.
From early guidance to a final figure
From enquiry to a confirmed proposal
01First review
We assess the information, clarify the scope and identify missing details. This enquiry does not generate an automatic price.
02Detailed quotation
The proposal sets out the agreed design, specification, price and fitting conditions after the necessary checks.
Send what you already have. We can identify the next useful photograph, measurement or decision.
Send photographs and dimensions →
Materials and details
Choose the specification as a whole
A surface, its supporting board, edges and hardware need to work together.
Product-specific performance and care instructions are checked against the selected specification.
The next step
Let's talk through the details.
If an option has caught your eye, send it with a photo of your home. I'll explain what information we need to consider whether it suits your space.
Scope and terms are confirmed before you place an order.
Before deciding
Questions before you enquire
Can a desk go under a window?＋
Yes, if sill height, window opening and reflected light permit comfortable use. We check the room itself.
Your project starts here
Send the details you have
Send opening dimensions, your equipment and a photograph including the chair. We will review the details and explain the next step.
- 01 Initial reply and feasibility review
- 02 Suggested next step
- 03 A detailed quotation antes de fabricar