Actual clearances
Measure what remains between units when more than one is in use.
MMV Studio
Bespoke kitchens in Torrevieja
We can assist you inEspañolEnglishDeutschРусский
Furniture planned for the room you actually have
A kitchen design in Torrevieja starts with the room as it stands: walls, services, appliances you wish to keep and enough space to open each drawer. The finish comes later.
Designed for your space
A proposal that fits your space
We define dimensions, storage, finishes and fitting before manufacture so every decision suits the actual space and its use.
Service plan
Water, extraction and electricity are checked before component sizes are fixed.
Maintainable fronts
Compare cleaning, feel and wear on the surfaces people touch most.
Named items
Cabinetry, worktop, appliances and work by other trades are identified in the quote.
Our process
From the first estimate to your final check
The measurements and the agreed specification turn an initial price range into a final quote. Design and project work are free when you commission us to make the furniture to that project.
A first price range
Photographs, rough sizes and your address let us discuss the scope. The figure remains provisional until we measure.
Survey at the property
We check the actual openings, services, wall lines and the route for bringing the pieces in.
Design where needed
If plans are needed, we develop them after the survey. The design and project are free when you commission us to make the furniture to that project.
The detailed quote
We set out the agreed layout, boards, fronts, fittings, delivery and any installation included in the order.
Your approval and deposit
You can check the full proposal before accepting it. Production begins after the agreed advance payment.
Workshop manufacture
The pieces are made to the approved measurements and specifications, with the agreed hardware prepared for fitting.
Delivery and fitting
We carry out the transport and installation specified in your order, then adjust the parts we have fitted.
Walk-through together
We test doors and drawers with you, record any outstanding details and close the job once the agreed result is confirmed.
Cabinets and appliances on one quotation
We can price the Torrevieja kitchen together with appliances from Balay, Teka or KromsLine, and compare higher-end options when they suit the brief. Choosing the actual models before the final drawing lets us set the openings, ventilation and connections around them.
The quotation separates furniture, appliances, worktop and fitting so you can see where the money goes. Tell us if you already own an oven, dishwasher or fridge: we can work from their model details instead of quoting replacements you do not need.
Send my kitchen details →
Your project starts here
Tell me what you want to change at home.
I'm Lorena Peña. You don't need to know the technical name for the furniture. Describe the problem in your own words and add a photo if you can; I'll help you work out the next step.
No obligation. Rough measurements are enough to get started.
Solutions for your space
The kitchen while it is in use
A layout that looks comfortable on paper must still work with the dishwasher open and someone walking through to the dining table.
Washing area
Position sink and dishwasher around the connections and check the remaining passage with the door open.
Clear preparation space
Keep usable worktop between appliances and a safe place to set ingredients or a hot tray.
Store near the task
Heavy pans, fragile glasses and daily groceries need different kinds of access.
Named appliances
Oven, fridge, hob and extractor dimensions and ventilation are needed before modules are manufactured.
Latest posts
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Configuration gallery
Examples of bespoke kitchens
Sixteen configurations showing different layouts, finishes and ways to integrate the furniture into a real room.
Oak island and tall cabinetsFull-height storage sits behind a separate surface for preparing food.
Timber with stoneTall units hold most of the storage while the island provides an extra working point.
Green kitchen beside diningA peninsula marks the edge of the kitchen without closing the room off.
Walnut and table islandStorage gathers along one wall, leaving a route around the middle piece.
Cooking on one wallA single run leaves room for a small table opposite the cabinets.
Sand tones around a cornerThe worktop turns the corner without filling every wall with units.
Three working sidesA U-shaped plan brings pantry, sink and daily drawers close together.
Lit central volumeCabinet lighting defines the transition from kitchen to living space.
Two facing runsWashing and cooking sit opposite each other; the middle aisle needs careful measurement.
Coffee behind doorsSmall appliances share a tall cabinet that can be closed after use.
Dark oak and metalContrasting fronts and work surfaces change the character without altering the plan.
Framed doors and plate shelfOpen shelving sits alongside integrated appliances and framed fronts.
Reachable working heightsA raised oven and pull-out pantry reduce bending in daily use.
Birch in a compact roomOpen shelves and a fold-down table fit several functions into limited space.
Pantry with clear sightlinesShallow shelving makes stored items visible without moving several rows.
Blue peninsula with seatsThe centre piece creates a place to sit and separates work from tall storage.
Specific information
What the room can accommodate
Compare movement and working area with doors open, not just on an empty plan.
One wall
A single run frees floor space but needs careful sequencing of tasks and services.
Facing runs
A galley arrangement adds worktop if the gap remains comfortable with drawers open.
A useful corner
An L or U need not be filled with mechanisms; access and cost can be compared.
Island only where it fits
Draw the perimeter with stools and cabinet doors open before sizing it or routing services.
Three ways to approach the specification
Where to focus the budget
These are priorities to discuss, rather than fixed packages or price bands.
Everyday function01
Start with the essentials
Give priority to a workable layout, useful capacity and suitable hardware.
- A clearly defined scope
- A focused choice of finishes
- Storage arranged for daily use
Personal detail02
Refine the visible finish
Compare additional finishes and internal accessories where they improve the result.
- Coordinated visible surfaces
- Accessories chosen for a purpose
- Samples for the finishes that matter
Special requirements03
Resolve the unusual details
Allow for additional design or workshop work when geometry, equipment or junctions require it.
- Detailed technical information
- Specific fixings or mechanisms
- Coordination with the relevant trades
A detailed quotation
The information behind a useful quotation
You can start with rough dimensions. We will tell you what needs to be checked before a final specification is prepared.
The space
Photographs and approximate dimensions show the available area and nearby doors or services.
Your priorities
Explain what you need the furniture to do and what is missing now.
Your references
Send a few examples and point out the details you like.
Timing and access
Tell us the address, intended date and any work taking place before fitting.
From early guidance to a final figure
From enquiry to a confirmed proposal
01First review
We assess the information, clarify the scope and identify missing details. This enquiry does not generate an automatic price.
02Detailed quotation
The proposal sets out the agreed design, specification, price and fitting conditions after the necessary checks.
Send what you already have. We can identify the next useful photograph, measurement or decision.
Send photographs and dimensions →
Materials and details
Choose the specification as a whole
A surface, its supporting board, edges and hardware need to work together.
Product-specific performance and care instructions are checked against the selected specification.
The next step
Let's talk through the details.
If an option has caught your eye, send it with a photo of your home. I'll explain what information we need to consider whether it suits your space.
Scope and terms are confirmed before you place an order.
Before deciding
Questions before you enquire
Can I keep my current appliances?＋
Yes, if they suit the design. Send their model details to check clearances, ventilation and opening.
Must the entire kitchen be replaced?＋
No. Where existing units are sound, we can assess whether partial work meets the brief.
What helps with an initial estimate?＋
Photographs, rough dimensions, the address and a list of what you intend to keep or change.
Your project starts here
Send the details you have
Send kitchen photographs, rough dimensions and the appliances you want to retain or integrate. We will review the details and explain the next step.
- 01 Initial reply and feasibility review
- 02 Suggested next step
- 03 A detailed quotation antes de fabricar