Existing cabinets checked
Carcases and fixings must be sound enough to retain the layout.
MMV Studio
Replacement kitchen doors in Torrevieja
We can assist you inEspañolEnglishDeutschРусский
Furniture planned for the room you actually have
Replacing kitchen doors can change the room without pulling out every cabinet. Before making new fronts in Torrevieja, we inspect the existing carcases, hinge positions and the clearance needed by drawers and appliances.
Designed for your space
A proposal that fits your space
We define dimensions, storage, finishes and fitting before manufacture so every decision suits the actual space and its use.
Hinges in the right place
Boring positions, swing and new door weight are confirmed before production.
Protected edges
The edge deserves as much care as the face, particularly near water.
A complete result
Plinths, exposed sides and appliance panels are considered with the doors.
Our process
From the first estimate to your final check
The measurements and the agreed specification turn an initial price range into a final quote. Design and project work are free when you commission us to make the furniture to that project.
A first price range
Photographs, rough sizes and your address let us discuss the scope. The figure remains provisional until we measure.
Survey at the property
We check the actual openings, services, wall lines and the route for bringing the pieces in.
Design where needed
If plans are needed, we develop them after the survey. The design and project are free when you commission us to make the furniture to that project.
The detailed quote
We set out the agreed layout, boards, fronts, fittings, delivery and any installation included in the order.
Your approval and deposit
You can check the full proposal before accepting it. Production begins after the agreed advance payment.
Workshop manufacture
The pieces are made to the approved measurements and specifications, with the agreed hardware prepared for fitting.
Delivery and fitting
We carry out the transport and installation specified in your order, then adjust the parts we have fitted.
Walk-through together
We test doors and drawers with you, record any outstanding details and close the job once the agreed result is confirmed.
Your project starts here
Tell me what you want to change at home.
I'm Lorena Peña. You don't need to know the technical name for the furniture. Describe the problem in your own words and add a photo if you can; I'll help you work out the next step.
No obligation. Rough measurements are enough to get started.
Solutions for your space
Inspect the carcases first: making it work
A finish photograph cannot tell us whether a door will fit. Sizes, edges, handles and end panels all need defining, especially near the fridge and dishwasher.
Inspect the carcases first
A damaged structure is not repaired simply by replacing its front.
See finishes at home
Hold a sample beside the worktop, floor and actual room light.
Measure each opening
Tall cupboards, corners and integrated machines need particular clearances and panels.
Latest posts
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Configuration gallery
Examples of replacement kitchen doors
Sixteen configurations showing different layouts, finishes and ways to integrate the furniture into a real room.
Plain white doors for existing unitsSimple fronts and adjusted hinges change the room without moving its layout.
Oak grain on new doorsVeneer brings texture; compare the individual pieces together before choosing.
Matt olive with the old worktopA fresh colour covers base and tall units while the working surface stays.
A fine frame on each frontRestrained relief adds depth without making the door look heavy.
An unbroken handle-free lineThe channel and edge need to work as one opening system.
Vertical texture across an islandGrooved faces emphasise the volume; their ends need careful junctions.
Rounded ends at a peninsulaCurved panels ease the route past the working area.
Textured glass above the worktopNarrow frames let light through while protecting the crockery inside.
A pantry behind tall frontsAlignment relies on the ventilation, hinges and dimensions of each appliance.
Two finishes for island and tall unitsThe materials distinguish preparation from storage within one door layout.
Sand above, oak belowPale upper cabinets feel lighter while timber texture sits closer to hand.
Matt fronts for frequent useConsider knocks, cleaning and edge strength alongside the colour.
Neutral doors that can be servicedAdjustable hinges and common handles ease later upkeep.
Pale oak with open-weave panelsVentilated doors add texture where the cabinet contents make them suitable.
Dark walnut on tall frontsFinger pulls and chosen grain need continuity across columns and side panels.
Lacquer, brass and ribbed glassLit displays and painted doors call for every junction to be agreed before making.
Three ways to approach the specification
Where to focus the budget
These are priorities to discuss, rather than fixed packages or price bands.
Everyday function01
Start with the essentials
Give priority to a workable layout, useful capacity and suitable hardware.
- A clearly defined scope
- A focused choice of finishes
- Storage arranged for daily use
Personal detail02
Refine the visible finish
Compare additional finishes and internal accessories where they improve the result.
- Coordinated visible surfaces
- Accessories chosen for a purpose
- Samples for the finishes that matter
Special requirements03
Resolve the unusual details
Allow for additional design or workshop work when geometry, equipment or junctions require it.
- Detailed technical information
- Specific fixings or mechanisms
- Coordination with the relevant trades
A detailed quotation
The information behind a useful quotation
You can start with rough dimensions. We will tell you what needs to be checked before a final specification is prepared.
The space
Photographs and approximate dimensions show the available area and nearby doors or services.
Your priorities
Explain what you need the furniture to do and what is missing now.
Your references
Send a few examples and point out the details you like.
Timing and access
Tell us the address, intended date and any work taking place before fitting.
From early guidance to a final figure
From enquiry to a confirmed proposal
01First review
We assess the information, clarify the scope and identify missing details. This enquiry does not generate an automatic price.
02Detailed quotation
The proposal sets out the agreed design, specification, price and fitting conditions after the necessary checks.
Send what you already have. We can identify the next useful photograph, measurement or decision.
Send photographs and dimensions →
Materials and details
Choose the specification as a whole
A surface, its supporting board, edges and hardware need to work together.
Product-specific performance and care instructions are checked against the selected specification.
The next step
Let's talk through the details.
If an option has caught your eye, send it with a photo of your home. I'll explain what information we need to consider whether it suits your space.
Scope and terms are confirmed before you place an order.
Before deciding
Questions before you enquire
Can I keep the worktop and cabinets?＋
Yes, where the carcases, fixings and layout are in good condition. We check before confirming the scope.
Your project starts here
Send the details you have
Send photographs of the fronts, cabinet interiors and hinges. We will review the details and explain the next step.
- 01 Initial reply and feasibility review
- 02 Suggested next step
- 03 A detailed quotation antes de fabricar