Choose the appliance first
The selected fridge or dishwasher sets the opening, airflow and door clearance.
MMV Studio
Bespoke kitchens for small spaces in Torrevieja
We can assist you inEspañolEnglishDeutschРусский
Furniture planned for the room you actually have
Filling every wall with cabinets does not fix a small kitchen. The oven still has to open, shopping must get through the doorway and someone needs a clear place to chop. We draw those movements before assigning units.
Designed for your space
A proposal that fits your space
We define dimensions, storage, finishes and fitting before manufacture so every decision suits the actual space and its use.
Room to use everything
Test drawers, cabinet doors and machines while open, not just in elevation.
Reachable upper storage
More cupboards help little if everyday items are too high.
A place to prepare food
Keep a clear worktop section, even if another component has to be smaller.
Our process
From the first estimate to your final check
The measurements and the agreed specification turn an initial price range into a final quote. Design and project work are free when you commission us to make the furniture to that project.
A first price range
Photographs, rough sizes and your address let us discuss the scope. The figure remains provisional until we measure.
Survey at the property
We check the actual openings, services, wall lines and the route for bringing the pieces in.
Design where needed
If plans are needed, we develop them after the survey. The design and project are free when you commission us to make the furniture to that project.
The detailed quote
We set out the agreed layout, boards, fronts, fittings, delivery and any installation included in the order.
Your approval and deposit
You can check the full proposal before accepting it. Production begins after the agreed advance payment.
Workshop manufacture
The pieces are made to the approved measurements and specifications, with the agreed hardware prepared for fitting.
Delivery and fitting
We carry out the transport and installation specified in your order, then adjust the parts we have fitted.
Walk-through together
We test doors and drawers with you, record any outstanding details and close the job once the agreed result is confirmed.
Your project starts here
Tell me what you want to change at home.
I'm Lorena Peña. You don't need to know the technical name for the furniture. Describe the problem in your own words and add a photo if you can; I'll help you work out the next step.
No obligation. Rough measurements are enough to get started.
Solutions for your space
Set out the tasks: making it work
First we list the essentials: appliances, preparation space and food storage. Then we check which heights and depths are genuinely usable, rather than simply what fits on paper.
Set out the tasks
Arrange washing, preparation, cooking and refrigeration around services and movement.
Judge depth properly
A shallower unit can restore circulation, provided its contents still fit.
Avoid blocked openings
The oven, dishwasher, drawers and table must all work when the room is occupied.
Latest posts
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Configuration gallery
Examples of bespoke kitchens for small spaces
Sixteen configurations showing different layouts, finishes and ways to integrate the furniture into a real room.
Two runs towards the balconyOak fronts divide cooking and washing, leaving a route between them.
White corner kitchenThe sink and oven sit in an L without pushing out the small dining table.
Green from floor to ceilingTall units finish both ends; the working niche stays in the centre.
Walnut with a small islandThe central surface gives one person a seat while the living room remains connected.
A complete run in 2.4 metresFull-height cupboards, smaller appliances and a folding table share a studio wall.
Kitchen beneath the stairsUnits step down with the slope while a pantry pulls out towards the hallway.
Blue beside a windowDaylight reaches the sink, and the tall storage leaves space for a table for two.
The kitchen behind folding doorsHob, sink, cold storage and drawers can be shut away after use.
A 45-centimetre-deep runThe units occupy a corridor recess without taking away access to the next room.
A table that rolls awayThe movable surface comes out when needed and tucks beneath the worktop.
Glass between kitchen and loungeA sliding partition admits light yet closes off the cooking area.
Units under a sloping roofLow drawers use the difficult end; available headroom sets the rest.
Working around a pillarA narrow pantry and short peninsula use the space on either side of it.
Three working sides by a windowThe U keeps the tasks close, with terracotta fronts bringing colour.
Panel across part of the kitchenA folding breakfast table comes out, then gives the floor back.
Cooking and laundry on one wallVented doors keep the machines apart from the hob area.
Three ways to approach the specification
Where to focus the budget
These are priorities to discuss, rather than fixed packages or price bands.
Everyday function01
Start with the essentials
Give priority to a workable layout, useful capacity and suitable hardware.
- A clearly defined scope
- A focused choice of finishes
- Storage arranged for daily use
Personal detail02
Refine the visible finish
Compare additional finishes and internal accessories where they improve the result.
- Coordinated visible surfaces
- Accessories chosen for a purpose
- Samples for the finishes that matter
Special requirements03
Resolve the unusual details
Allow for additional design or workshop work when geometry, equipment or junctions require it.
- Detailed technical information
- Specific fixings or mechanisms
- Coordination with the relevant trades
A detailed quotation
The information behind a useful quotation
You can start with rough dimensions. We will tell you what needs to be checked before a final specification is prepared.
The space
Photographs and approximate dimensions show the available area and nearby doors or services.
Your priorities
Explain what you need the furniture to do and what is missing now.
Your references
Send a few examples and point out the details you like.
Timing and access
Tell us the address, intended date and any work taking place before fitting.
From early guidance to a final figure
From enquiry to a confirmed proposal
01First review
We assess the information, clarify the scope and identify missing details. This enquiry does not generate an automatic price.
02Detailed quotation
The proposal sets out the agreed design, specification, price and fitting conditions after the necessary checks.
Send what you already have. We can identify the next useful photograph, measurement or decision.
Send photographs and dimensions →
Materials and details
Choose the specification as a whole
A surface, its supporting board, edges and hardware need to work together.
Product-specific performance and care instructions are checked against the selected specification.
The next step
Let's talk through the details.
If an option has caught your eye, send it with a photo of your home. I'll explain what information we need to consider whether it suits your space.
Scope and terms are confirmed before you place an order.
Before deciding
Questions before you enquire
Are smaller appliances always better?＋
No. A compact model helps only if its capacity suits your habits and it improves the working space. We compare use and dimensions first.
Your project starts here
Send the details you have
Send photographs, wall dimensions and the appliances you need. We will review the details and explain the next step.
- 01 Initial reply and feasibility review
- 02 Suggested next step
- 03 A detailed quotation antes de fabricar