Room to pass
Check the route from the door with its leaf open and someone walking through.
MMV Studio
Bespoke hallway furniture in Torrevieja
We can assist you inEspañolEnglishDeutschРусский
Furniture planned for the room you actually have
Where do keys, bags and shoes land when you get home? For a Torrevieja entrance unit, we start with that routine and the space left by the open front door. A cupboard that is too deep can make a tidy entrance hard to walk through.
Designed for your space
A proposal that fits your space
We define dimensions, storage, finishes and fitting before manufacture so every decision suits the actual space and its use.
A place for daily items
Keys, post and bags stay close to hand, while coats do not crowd the passage.
Air for shoes
Divide the interior around shoe sizes and boots, then choose a suitable opening.
Services in reach
Keep the entry phone, consumer unit and sockets usable after fitting.
Our process
From the first estimate to your final check
The measurements and the agreed specification turn an initial price range into a final quote. Design and project work are free when you commission us to make the furniture to that project.
A first price range
Photographs, rough sizes and your address let us discuss the scope. The figure remains provisional until we measure.
Survey at the property
We check the actual openings, services, wall lines and the route for bringing the pieces in.
Design where needed
If plans are needed, we develop them after the survey. The design and project are free when you commission us to make the furniture to that project.
The detailed quote
We set out the agreed layout, boards, fronts, fittings, delivery and any installation included in the order.
Your approval and deposit
You can check the full proposal before accepting it. Production begins after the agreed advance payment.
Workshop manufacture
The pieces are made to the approved measurements and specifications, with the agreed hardware prepared for fitting.
Delivery and fitting
We carry out the transport and installation specified in your order, then adjust the parts we have fitted.
Walk-through together
We test doors and drawers with you, record any outstanding details and close the job once the agreed result is confirmed.
Your project starts here
Tell me what you want to change at home.
I'm Lorena Peña. You don't need to know the technical name for the furniture. Describe the problem in your own words and add a photo if you can; I'll help you work out the next step.
No obligation. Rough measurements are enough to get started.
Solutions for your space
Check the front door before designing the cupboard
A bench, hooks and closed storage might work together; a shallow console may be enough. Width, door swing and the things you want to put away decide between them.
A shallow console
Where the entrance is narrow, a shelf and drawers may do more good than a full wall of cabinets.
A seat for changing shoes
Place the bench clear of the door and use the space underneath where helpful.
Tall closed storage
Count coats and cleaning equipment before deciding whether the unit needs to reach the ceiling.
A useful mirror
Its position follows light and viewing distance, rather than symmetry alone.
Latest posts
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Configuration gallery
Examples of bespoke hallway furniture
Sixteen configurations showing different layouts, finishes and ways to integrate the furniture into a real room.
A seat with shoe storageOak drawers and hooks meet by the bench; the front door swing must still be checked for the actual room.
A ledge in a small entranceThe shallow console holds keys and post without taking the depth of a coat cupboard.
Storage behind one tall frontCoats, shoes and cleaning items can be separated inside a continuous cabinet.
Tall mirror and raised drawerKeeping the floor visible lightens the piece and makes cleaning underneath easier.
Cabinet built around a radiatorThe grille must allow airflow and leave the appliance serviceable.
Under-stair arrival spaceLower drawers follow the slope, while the taller opening takes coats.
A place for each family memberHooks, baskets and shelves stop bags and footwear gathering in one heap.
Shallow storage along the hallTilt-out fronts and a narrow shelf retain walking space.
A bench that is easy to useA firm seat, visible handles and free space below help with putting on shoes.
Pale oak with open-weave doorsThe shoe compartment has air movement within a light, natural-looking finish.
Subtle mouldings at the entranceAn upholstered bench sits below closed, traditional-style cabinetry.
Simple storage for busy useVisible hooks and wipeable surfaces keep upkeep straightforward.
Keys, letters and parcels sortedA tray and small recesses separate pocket items from larger deliveries.
A light division before the loungeSlats and storage on both sides lend privacy while keeping daylight moving.
Rounded corners on the route inCurved ends remove a protruding edge between door and living area.
Walnut beside a mineral topWarm light shows the finish while closed fronts leave daily belongings out of sight.
Three ways to approach the specification
Where to focus the budget
These are priorities to discuss, rather than fixed packages or price bands.
Everyday function01
Start with the essentials
Give priority to a workable layout, useful capacity and suitable hardware.
- A clearly defined scope
- A focused choice of finishes
- Storage arranged for daily use
Personal detail02
Refine the visible finish
Compare additional finishes and internal accessories where they improve the result.
- Coordinated visible surfaces
- Accessories chosen for a purpose
- Samples for the finishes that matter
Special requirements03
Resolve the unusual details
Allow for additional design or workshop work when geometry, equipment or junctions require it.
- Detailed technical information
- Specific fixings or mechanisms
- Coordination with the relevant trades
A detailed quotation
The information behind a useful quotation
You can start with rough dimensions. We will tell you what needs to be checked before a final specification is prepared.
The space
Photographs and approximate dimensions show the available area and nearby doors or services.
Your priorities
Explain what you need the furniture to do and what is missing now.
Your references
Send a few examples and point out the details you like.
Timing and access
Tell us the address, intended date and any work taking place before fitting.
From early guidance to a final figure
From enquiry to a confirmed proposal
01First review
We assess the information, clarify the scope and identify missing details. This enquiry does not generate an automatic price.
02Detailed quotation
The proposal sets out the agreed design, specification, price and fitting conditions after the necessary checks.
Send what you already have. We can identify the next useful photograph, measurement or decision.
Send photographs and dimensions →
Materials and details
Choose the specification as a whole
A surface, its supporting board, edges and hardware need to work together.
Product-specific performance and care instructions are checked against the selected specification.
The next step
Let's talk through the details.
If an option has caught your eye, send it with a photo of your home. I'll explain what information we need to consider whether it suits your space.
Scope and terms are confirmed before you place an order.
Before deciding
Questions before you enquire
Will a shoe cupboard fit a narrow entrance?＋
It depends on clear width and the types of shoes. We compare a shallow unit with other opening systems.
Can the electrical consumer unit be hidden?＋
Yes, if it remains accessible and the cabinet respects the installation requirements.
Which pictures should I send?＋
One looking in from the door and one facing back, with the door open. Add rough width and depth.
Your project starts here
Send the details you have
We will review your enquiry and contact you to clarify the scope and next steps. Sending this form does not place an order.
- 01 Initial reply and feasibility review
- 02 Suggested next step
- 03 A detailed quotation antes de fabricar