Actual angle
Walls and floor are not assumed square.
MMV Studio
Corner wardrobes in Torrevieja
We can assist you inEspañolEnglishDeutschРусский
Furniture planned for the room you actually have
A wardrobe corner may look deep and remain awkward to use. For a Torrevieja corner unit we measure both walls, each door movement and reach into the back; daily clothes should not sit hidden behind another section.
Designed for your space
Make the corner usable, not merely covered
Both walls are measured. If they do not meet at a perfect angle, the cutting plan and scribes must absorb the difference without leaving doors that catch.
Reachable depth
Unreachable volume is not counted as useful.
Coordinated leaves
Doors on the two sides do not block each other.
Fittable parts
Large units are divided to suit delivery.
Our process
From the first estimate to your final check
The measurements and the agreed specification turn an initial price range into a final quote. Design and project work are free when you commission us to make the furniture to that project.
A first price range
Photographs, rough sizes and your address let us discuss the scope. The figure remains provisional until we measure.
Survey at the property
We check the actual openings, services, wall lines and the route for bringing the pieces in.
Design where needed
If plans are needed, we develop them after the survey. The design and project are free when you commission us to make the furniture to that project.
The detailed quote
We set out the agreed layout, boards, fronts, fittings, delivery and any installation included in the order.
Your approval and deposit
You can check the full proposal before accepting it. Production begins after the agreed advance payment.
Workshop manufacture
The pieces are made to the approved measurements and specifications, with the agreed hardware prepared for fitting.
Delivery and fitting
We carry out the transport and installation specified in your order, then adjust the parts we have fitted.
Walk-through together
We test doors and drawers with you, record any outstanding details and close the job once the agreed result is confirmed.
Your project starts here
Tell me what you want to change at home.
I'm Lorena Peña. You don't need to know the technical name for the furniture. Describe the problem in your own words and add a photo if you can; I'll help you work out the next step.
No obligation. Rough measurements are enough to get started.
Interior decisions
Geometry and access
Depth only adds value when it can be used.
Angle
A wall can deviate by several centimetres.
Hinges
Their swing is tested against neighbouring fronts.
Light
A deep corner needs visibility to be useful.
Fitting
Corner parts must fit along the delivery route.
From problem to drawing
Three different corner situations
Possible situations that explain the design, not claims of completed work.
Example 01
Two walls, two uses
Daily hanging and luggage do not need equal access.
- Situation
- List the clothes used each day.
- Design response
- Give frequent garments the easier opening.
- Check before making
- Keep deeper items removable.
Example 02
Very deep recess
A front-facing opening may release the volume.
- Situation
- Measure the internal triangle.
- Design response
- Consider front entry or pull-out trays.
- Check before making
- No one should empty a unit to reach one item.
Example 03
Passage near a window
A softer closure avoids a heavy wall of cabinetry.
- Situation
- Check window swing and movement through the room.
- Design response
- Change front depth or radius.
- Check before making
- Leave daylight and passage intact.
Latest posts
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Configuration gallery
Examples of corner wardrobes
Sixteen configurations showing different layouts, finishes and ways to integrate the furniture into a real room.
Beside the stairThe front leaves the arrival route clear.
Corner at a windowThe glazed leaf can still open.
Under the roofDifferent sections follow the slope.
Lit walnut shelvesDeeper storage receives illumination.
Rounded white cornerThe curve eases turning.
Oak with sand lacquerTwo tones mark separate sides.
Glass in the cornerContents can be seen from the bedroom.
Blue child’s roomLower shelves are reachable.
Plain white storageSimple interiors are easy to maintain.
Rotating fittingThe back comes forward on opening.
Traditional greenFramed doors close the angle.
Dark oak and mirrorReflection lightens a large front.
Irregular atticThe corner is divided by available height.
Grey beside a benchSeat and wardrobe share a wall.
Curved walnutA smooth front changes direction.
Two door systemsEach side follows a different movement.
Six configurations
Compare ways into the recess
Doors and fittings are chosen on an open-door plan.
| Option | Where it helps | Check before deciding |
|---|---|---|
| Two-run L | Broad adjoining walls | Door junction |
| Diagonal front | Deep corner | Reach to the back |
| Curve | Walking around the corner | Radius and production |
| Open shelves | Frequent objects | Dust and light |
| Pull-out | Hard-to-reach depth | Travel outside the unit |
| Two units | Unequal walls | Visual connection |
Written scope
Recorded dimensions and junctions
Pricing refers to the measured angle and interior.
Angle measurement
Both walls and floor are checked at several points.
Contents
Uses are assigned to each side.
Access
We define how the back is reached.
Doors
Swings and handles are tested together.
Junctions
Scribes and centre connection are detailed.
Installation
Units can be transported and adjusted.
Removal of old furniture, painting and electrical work are priced separately when requested.
From drawing to fitting
Before cutting material
We establish how the pieces enter the home.
How the work proceeds
- 01First estimate
Photographs, rough dimensions and a list of needs help us examine the idea.
- 02Site measurement
We check the room, obstructions and the route for bringing pieces in.
- 03Design and quotation
If a design is needed, we prepare it; the design is free when its manufacture is ordered. After scope and deposit are agreed, we book production.
- 04Fitting and review
We install, adjust doors and drawers and inspect the result with you.
What adds to the cost of a corner
An uneven angle adds cutting and finishing work.
Pull-outs cost more than fixed shelves.
Curved or diagonal fronts change the cut list.
Largest pieces must turn within the property.
Before the workshop · Torrevieja
Measure the Torrevieja home before making
The specific address matters for the opening and delivery route, rather than because each neighbourhood has its own wardrobe style.
Existing recesses
A column, dropped ceiling or skirting can alter the cut list.
Property access
Floor, lift and stair turns influence panel size.
How the home is used
Daily living and occasional stays may call for different interiors.
Before you instruct us
Details to verify before ordering
The proposal states materials, included work and fitting conditions. Any change is explained before production.
Scope
Manufacture, transport, fitting and exclusions are written down.
Contact
Questions and documents can be sent through the published contact channels.
Measurement
Final dimensions follow a site visit or an expressly agreed validation.
Project lead
The team coordinates choices, measurement and fitting.
Warranty
Conditions and care for supplied parts accompany the order.
The next step
Let's talk through the details.
If an option has caught your eye, send it with a photo of your home. I'll explain what information we need to consider whether it suits your space.
Scope and terms are confirmed before you place an order.
Before requesting a quotation
Questions about corner wardrobes
Can every corner be used?＋
Only when it can be reached; less depth can sometimes work better.
Can there be drawers?＋
Door opening and drawer travel decide.
How is it measured?＋
We take dimensions on both walls and verify the real angle.
Your project starts here
Send the details you have
We will review your enquiry and contact you to clarify the scope and next steps. Sending this form does not place an order.
- 01 Initial reply and feasibility review
- 02 Suggested next step
- 03 A detailed quotation antes de fabricar