Height for the contents
Folded clothing and accessories are divided by their actual size.
MMV Studio
Custom drawer units in Torrevieja
We can assist you inEspañolEnglishDeutschРусский
Furniture planned for the room you actually have
Before splitting a drawer unit into compartments in Torrevieja, lay out what it must hold. T-shirts, files and small accessories need different heights; a handsome drawer is little use if it cannot open far enough.
Designed for your space
A proposal that fits your space
We define dimensions, storage, finishes and fitting before manufacture so every decision suits the actual space and its use.
Room to pull out
Test the drawer route beside beds, doors and other furniture.
Runner for the load
Expected weight and frequency of use guide the mechanism choice.
Stable support
Check the base or fixings before choosing a tall or floating unit.
Our process
From the first estimate to your final check
The measurements and the agreed specification turn an initial price range into a final quote. Design and project work are free when you commission us to make the furniture to that project.
A first price range
Photographs, rough sizes and your address let us discuss the scope. The figure remains provisional until we measure.
Survey at the property
We check the actual openings, services, wall lines and the route for bringing the pieces in.
Design where needed
If plans are needed, we develop them after the survey. The design and project are free when you commission us to make the furniture to that project.
The detailed quote
We set out the agreed layout, boards, fronts, fittings, delivery and any installation included in the order.
Your approval and deposit
You can check the full proposal before accepting it. Production begins after the agreed advance payment.
Workshop manufacture
The pieces are made to the approved measurements and specifications, with the agreed hardware prepared for fitting.
Delivery and fitting
We carry out the transport and installation specified in your order, then adjust the parts we have fitted.
Walk-through together
We test doors and drawers with you, record any outstanding details and close the job once the agreed result is confirmed.
Your project starts here
Tell me what you want to change at home.
I'm Lorena Peña. You don't need to know the technical name for the furniture. Describe the problem in your own words and add a photo if you can; I'll help you work out the next step.
No obligation. Rough measurements are enough to get started.
Solutions for your space
Forget perfect symmetry: making it work
The number of fronts alone says little about capacity. We check usable depth, runners, expected weight and the space in front. Inside a wardrobe, hinges and door clearance matter too.
Forget perfect symmetry
One tall drawer for bulky clothes may help more than two matching shallow ones.
Reach the back
Where the whole drawer must be visible, consider appropriate full-extension runners.
Fit inside a wardrobe
The new front must clear hinges and existing doors before its width is fixed.
Latest posts
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Configuration gallery
Examples of custom drawer units
Sixteen configurations showing different layouts, finishes and ways to integrate the furniture into a real room.
Folded clothes beneath hanging spaceSix oak drawers use the lower strip, with a lit shelf above.
Walnut in a slender openingA taller unit offsets the narrow width; side lighting makes the fronts easier to see.
White drawers with open nichesClosed compartments hold spare items while exposed shelves serve the daily routine.
Green fronts below the railPlain drawers share the wall with a ventilated shoe area and interior light.
Three drawers inside a wardrobeThe low unit leaves room for shirts and offers a shelf above its fronts.
A visible jewellery tray in an islandGlass reveals accessories at a glance while lower drawers take clothing.
Drawers following a roof slopeChanging widths use the reachable part of an attic opening.
Two sides, different belongingsGreen drawers, an aired shoe shelf and short hanging share one scheme.
A pull-out tray for small piecesDividers keep watches and belts apart as the organiser slides out.
Low drawers for childrenHandles sit within reach; edges should suit how the room is used.
Seven fronts in a nicheShallow drawers make use of the tight strip next to the bed.
Ribbed drawer frontsDifferent internal heights separate accessories from bulkier folded clothing.
Drawers meeting at a cornerUnits of differing height connect two wardrobe walls without closing off the angle.
Graphite drawers off the floorThree raised fronts expose the floor and make cleaning beneath possible.
Sage green with framed frontsMetal pulls and timber interiors accompany the traditional panel detail.
Four drawers in an existing wardrobeFiller sides allow a grey module to be added without replacing the whole interior.
Three ways to approach the specification
Where to focus the budget
These are priorities to discuss, rather than fixed packages or price bands.
Everyday function01
Start with the essentials
Give priority to a workable layout, useful capacity and suitable hardware.
- A clearly defined scope
- A focused choice of finishes
- Storage arranged for daily use
Personal detail02
Refine the visible finish
Compare additional finishes and internal accessories where they improve the result.
- Coordinated visible surfaces
- Accessories chosen for a purpose
- Samples for the finishes that matter
Special requirements03
Resolve the unusual details
Allow for additional design or workshop work when geometry, equipment or junctions require it.
- Detailed technical information
- Specific fixings or mechanisms
- Coordination with the relevant trades
A detailed quotation
The information behind a useful quotation
You can start with rough dimensions. We will tell you what needs to be checked before a final specification is prepared.
The space
Photographs and approximate dimensions show the available area and nearby doors or services.
Your priorities
Explain what you need the furniture to do and what is missing now.
Your references
Send a few examples and point out the details you like.
Timing and access
Tell us the address, intended date and any work taking place before fitting.
From early guidance to a final figure
From enquiry to a confirmed proposal
01First review
We assess the information, clarify the scope and identify missing details. This enquiry does not generate an automatic price.
02Detailed quotation
The proposal sets out the agreed design, specification, price and fitting conditions after the necessary checks.
Send what you already have. We can identify the next useful photograph, measurement or decision.
Send photographs and dimensions →
Materials and details
Choose the specification as a whole
A surface, its supporting board, edges and hardware need to work together.
Product-specific performance and care instructions are checked against the selected specification.
The next step
Let's talk through the details.
If an option has caught your eye, send it with a photo of your home. I'll explain what information we need to consider whether it suits your space.
Scope and terms are confirmed before you place an order.
Before deciding
Questions before you enquire
Can drawers be added to my current wardrobe?＋
Yes, after measuring the opening, hinges and available pull-out space. The addition must not block the rest of the wardrobe.
Your project starts here
Send the details you have
Send the opening dimensions and what will be stored in the drawers. We will review the details and explain the next step.
- 01 Initial reply and feasibility review
- 02 Suggested next step
- 03 A detailed quotation antes de fabricar