Solutions for every room
Wardrobes, kitchens, living rooms, bedrooms, bathrooms and workspaces adapted to the actual home.
MMV Studio
Custom furniture in Aguas Nuevas, Torrevieja
We can assist you inEspañolEnglishDeutschРусский
Furniture planned for the room you actually have
For a project in Aguas Nuevas, tell us which appliances belong in the kitchen or utility area. Their models, connections and door swings affect the plan more than the chosen front colour.
Designed for your space
Bespoke furniture designed for your home in Aguas Nuevas
Pictures and rough dimensions let us consider cooking, food storage and laundry together. A visit confirms service positions, the route for the units and future maintenance access. We confirm the measured survey, access, delivery and fitting before manufacture.
Design adapted to the property
We check walls, columns, services, walkways and proportions before defining the furniture.
Materials recomendados
Your project manager recommends substrates, finishes and hardware suited to the use, maintenance and budget.
Measuring and fitting in Aguas Nuevas
We coordinate the technical visit, delivery, installation, adjustments and final check in the area.
Our process
From enquiry to fitted furniture in Aguas Nuevas
The measurements and the agreed specification turn an initial price range into a final quote. Design and project work are free when you commission us to make the furniture to that project.
A first price range
Photographs, rough sizes and your address let us discuss the scope. The figure remains provisional until we measure.
Survey at the property
We check the actual openings, services, wall lines and the route for bringing the pieces in.
Design where needed
If plans are needed, we develop them after the survey. The design and project are free when you commission us to make the furniture to that project.
The detailed quote
We set out the agreed layout, boards, fronts, fittings, delivery and any installation included in the order.
Your approval and deposit
You can check the full proposal before accepting it. Production begins after the agreed advance payment.
Workshop manufacture
The pieces are made to the approved measurements and specifications, with the agreed hardware prepared for fitting.
Delivery and fitting
We carry out the transport and installation specified in your order, then adjust the parts we have fitted.
Walk-through together
We test doors and drawers with you, record any outstanding details and close the job once the agreed result is confirmed.
Your project starts here
Tell me what you want to change at home.
I'm Lorena Peña. You don't need to know the technical name for the furniture. Describe the problem in your own words and add a photo if you can; I'll help you work out the next step.
No obligation. Rough measurements are enough to get started.
Solutions for your space
Furniture that allows equipment to work and be serviced
Hiding a washer, fridge or dishwasher is not enough. It must open, ventilate, connect and eventually be removable.
Kitchen with free worktop
Keep a useful stretch between hob and sink before adding storage.
Organised utility area
Baskets, products and machines are placed so loading remains easy.
Extra cupboard
Shelves at different heights hold food, small appliances or tableware.
Bathroom access panels
Under-basin storage is drawn around pipework that may need inspection.
Latest posts
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Configuration gallery
Custom furniture projects for homes in Aguas Nuevas
Twelve project types showing different layouts, finishes and ways to integrate the furniture into a real room.
Wardrobes and dressing roomsStorage planned around the opening, wall and required capacity
Custom kitchensLayout and equipment coordinated with the services
Living and dining roomsIntegrated storage, media and display compositions
BedroomsHeadboards, wardrobes and occasional furniture designed together
Bathrooms and utility roomsDurable solutions that are straightforward to maintain
High-capacity wardrobeAn internal layout organised around daily routines
Kitchen with additional storageTall units, work zones and appliances planned together
Media wallCabling, ventilation and storage integrated into the elevation
Practical hallway furnitureA landing surface, seating and storage fitted to the entrance
Interior joineryDoors, wall panelling and junctions aligned with the home
Home officeDesk space, filing and connections resolved in one scheme
Commercial solutionDurable furniture for a workplace or customer-facing area
Specific information
Before sizing appliance spaces
The selected model and service points prevent a cabinet opening from being made too tight.
Appliances staying
Send photographs of labels or model details where available.
New appliances
Name the intended models before cabinets are finalised.
Water and power points
Show their positions and say if another contractor will move them.
Property access
Street, floor and lift help plan component sizes and delivery.
Three ways to approach the specification
Where to focus the budget
These are priorities to discuss, rather than fixed packages or price bands.
Everyday function01
Start with the essentials
Give priority to a workable layout, useful capacity and suitable hardware.
- A clearly defined scope
- A focused choice of finishes
- Storage arranged for daily use
Personal detail02
Refine the visible finish
Compare additional finishes and internal accessories where they improve the result.
- Coordinated visible surfaces
- Accessories chosen for a purpose
- Samples for the finishes that matter
Special requirements03
Resolve the unusual details
Allow for additional design or workshop work when geometry, equipment or junctions require it.
- Detailed technical information
- Specific fixings or mechanisms
- Coordination with the relevant trades
A detailed quotation
What we need to quote for your bespoke furniture in Aguas Nuevas accurately
You can start with rough dimensions. We will tell you what needs to be checked before a final specification is prepared.
The space
Photographs and approximate dimensions show the available area and nearby doors or services.
Your priorities
Explain what you need the furniture to do and what is missing now.
Your references
Send a few examples and point out the details you like.
Timing and access
Tell us the address, intended date and any work taking place before fitting.
From early guidance to a final figure
From enquiry to a confirmed proposal
01First review
We assess the information, clarify the scope and identify missing details. This enquiry does not generate an automatic price.
02Detailed quotation
The proposal sets out the agreed design, specification, price and fitting conditions after the necessary checks.
Send what you already have. We can identify the next useful photograph, measurement or decision.
Send photographs and dimensions →
Materials and details
We help you choose the right furniture materials in Aguas Nuevas
A surface, its supporting board, edges and hardware need to work together.
Product-specific performance and care instructions are checked against the selected specification.
The next step
Let's talk through the details.
If an option has caught your eye, send it with a photo of your home. I'll explain what information we need to consider whether it suits your space.
Scope and terms are confirmed before you place an order.
Local questions
Questions before you enquire
Must I buy the appliances first?＋
Not for the first enquiry. Before manufacture we need confirmed models or sizes and installation requirements.
Can a washing machine sit behind doors?＋
That depends on ventilation, connections and the space needed to open and remove it. We check the model specification.
What if services are being moved?＋
The layout follows the new service plan; final sizes are taken once the installations are settled.
Can kitchen and utility be planned together?＋
Yes. Both functions can be scoped together, with materials, appliances and fitting named for each room.
Your project starts here
Send the details you have
Send the address in Aguas Nuevas, photographs and the furniture you need. We will confirm coverage and what information is needed next.
- 01 Initial reply and feasibility review
- 02 Suggested next step
- 03 A detailed quotation antes de fabricar
Made-to-measure furniture in Aguas Nuevas for rooms with appliances
For a kitchen or utility area, the appliance specification can change the cabinet drawing more than the wall length. We ask for model numbers early so the doors, air gaps and service points remain usable.
Allow space behind the door
A washing machine needs room for hoses and later removal. We also check how far a dishwasher projects when open and whether the extractor route affects the upper cupboards.
Make cleaning possible
Accessible plinths and properly finished edges matter around sinks and appliances. The board, joint and finish are selected for the likely exposure; a moisture-resistant board is not treated as waterproof.
Quote the equipment separately
Tell us which appliances you are keeping, or ask us to price alternatives. Furniture, appliances, agreed fitting and work by other trades should be identifiable in the final proposal.
Send the appliance references, a photograph of the service points and your Aguas Nuevas address. We can then discuss the scope before a survey.