Solutions for every room
Wardrobes, kitchens, living rooms, bedrooms, bathrooms and workspaces adapted to the actual home.
MMV Studio
Custom furniture in La Mata, Torrevieja
We can assist you inEspañolEnglishDeutschРусский
Furniture planned for the room you actually have
For furniture in La Mata, show us the room as it is used, rather than an empty wall alone. If the home is occupied seasonally, decide where luggage, guest clothes and cleaning supplies belong when the property is closed.
Designed for your space
Bespoke furniture designed for your home in La Mata
The address and access determine when a survey can happen. We then look at ventilation, frequent cleaning and the light falling on the finish beside flooring that will remain. We confirm the measured survey, access, delivery and fitting before manufacture.
Design adapted to the property
We check walls, columns, services, walkways and proportions before defining the furniture.
Materials recomendados
Your project manager recommends substrates, finishes and hardware suited to the use, maintenance and budget.
Measuring and fitting in La Mata
We coordinate the technical visit, delivery, installation, adjustments and final check in the area.
Our process
From enquiry to fitted furniture in La Mata
The measurements and the agreed specification turn an initial price range into a final quote. Design and project work are free when you commission us to make the furniture to that project.
A first price range
Photographs, rough sizes and your address let us discuss the scope. The figure remains provisional until we measure.
Survey at the property
We check the actual openings, services, wall lines and the route for bringing the pieces in.
Design where needed
If plans are needed, we develop them after the survey. The design and project are free when you commission us to make the furniture to that project.
The detailed quote
We set out the agreed layout, boards, fronts, fittings, delivery and any installation included in the order.
Your approval and deposit
You can check the full proposal before accepting it. Production begins after the agreed advance payment.
Workshop manufacture
The pieces are made to the approved measurements and specifications, with the agreed hardware prepared for fitting.
Delivery and fitting
We carry out the transport and installation specified in your order, then adjust the parts we have fitted.
Walk-through together
We test doors and drawers with you, record any outstanding details and close the job once the agreed result is confirmed.
Your project starts here
Tell me what you want to change at home.
I'm Lorena Peña. You don't need to know the technical name for the furniture. Describe the problem in your own words and add a photo if you can; I'll help you work out the next step.
No obligation. Rough measurements are enough to get started.
Solutions for your space
Storage for arrival and departure
A seasonal home may need space for clothes, luggage and cleaning without giving every wall over to cupboards. Its actual routine sets the layout.
Wardrobe for clothing and cases
Hanging space, upper shelves and luggage bays are measured separately.
A kitchen for actual use
Set appliances and a clear preparation area before adding more cabinets.
Living room for guests
Low furniture and closed storage can share a wall without narrowing the routes.
Bathroom that is easy to maintain
Leave plumbing accessible and room for supplies that need replacing.
Latest posts
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Configuration gallery
Custom furniture projects for homes in La Mata
Twelve project types showing different layouts, finishes and ways to integrate the furniture into a real room.
Wardrobes and dressing roomsStorage planned around the opening, wall and required capacity
Custom kitchensLayout and equipment coordinated with the services
Living and dining roomsIntegrated storage, media and display compositions
BedroomsHeadboards, wardrobes and occasional furniture designed together
Bathrooms and utility roomsDurable solutions that are straightforward to maintain
High-capacity wardrobeAn internal layout organised around daily routines
Kitchen with additional storageTall units, work zones and appliances planned together
Media wallCabling, ventilation and storage integrated into the elevation
Practical hallway furnitureA landing surface, seating and storage fitted to the entrance
Interior joineryDoors, wall panelling and junctions aligned with the home
Home officeDesk space, filing and connections resolved in one scheme
Commercial solutionDurable furniture for a workplace or customer-facing area
Specific information
Check the room before choosing finishes
View samples beside the floor and under that room’s light; a catalogue photograph cannot show how they will look there.
An intermittently occupied home
Tell us what remains stored and who will access it while you are away.
Direct sunlight
Check where it falls before settling the visible surface and colour.
Appliances already selected
Send model details so openings and ventilation can be checked.
Bringing parts inside
Confirm the floor level, lift and route to each room.
Three ways to approach the specification
Where to focus the budget
These are priorities to discuss, rather than fixed packages or price bands.
Everyday function01
Start with the essentials
Give priority to a workable layout, useful capacity and suitable hardware.
- A clearly defined scope
- A focused choice of finishes
- Storage arranged for daily use
Personal detail02
Refine the visible finish
Compare additional finishes and internal accessories where they improve the result.
- Coordinated visible surfaces
- Accessories chosen for a purpose
- Samples for the finishes that matter
Special requirements03
Resolve the unusual details
Allow for additional design or workshop work when geometry, equipment or junctions require it.
- Detailed technical information
- Specific fixings or mechanisms
- Coordination with the relevant trades
A detailed quotation
What we need to quote for your bespoke furniture in La Mata accurately
You can start with rough dimensions. We will tell you what needs to be checked before a final specification is prepared.
The space
Photographs and approximate dimensions show the available area and nearby doors or services.
Your priorities
Explain what you need the furniture to do and what is missing now.
Your references
Send a few examples and point out the details you like.
Timing and access
Tell us the address, intended date and any work taking place before fitting.
From early guidance to a final figure
From enquiry to a confirmed proposal
01First review
We assess the information, clarify the scope and identify missing details. This enquiry does not generate an automatic price.
02Detailed quotation
The proposal sets out the agreed design, specification, price and fitting conditions after the necessary checks.
Send what you already have. We can identify the next useful photograph, measurement or decision.
Send photographs and dimensions →
Materials and details
We help you choose the right furniture materials in La Mata
A surface, its supporting board, edges and hardware need to work together.
Product-specific performance and care instructions are checked against the selected specification.
The next step
Let's talk through the details.
If an option has caught your eye, send it with a photo of your home. I'll explain what information we need to consider whether it suits your space.
Scope and terms are confirmed before you place an order.
Local questions
Questions before you enquire
Can I enquire while I am away from La Mata?＋
Yes. Photographs, address and rough measurements start the discussion. A production survey is arranged when we can enter the property.
Which finish suits a sunny window?＋
It depends on light, construction and use. We review relevant samples in the room before settling the specification.
May appliances be hidden behind doors?＋
Yes, where airflow, connections and servicing access are resolved in the design.
Could several rooms be planned together?＋
Kitchen, wardrobes and bathroom can be ordered as one project, with distinct functions and shared finishes where useful.
Your project starts here
Send the details you have
Send the address in La Mata, photographs and the furniture you need. We will confirm coverage and what information is needed next.
- 01 Initial reply and feasibility review
- 02 Suggested next step
- 03 A detailed quotation antes de fabricar
Furniture in La Mata should suit the way the property is occupied
If you use a home for part of the year, arrival and departure create different storage needs. Bedding, suitcases and cleaning equipment take space, but extra doors alone do not make that storage easier to use.
Size shelves around real objects
A deep shelf can hide smaller things behind larger ones. We list the bulky items first, keep essentials close at hand and reserve higher spaces for what is used less often.
Test the finish in the room
A catalogue image does not show how a surface looks beside your floor. We compare a sample where the furniture will stand, then name the face, edge and care instructions in the specification.
Keep existing services accessible
Before covering a wall, we locate vents and equipment that may need attention later. The design should explain how to reach them without dismantling a whole run of cabinets.
Tell us whether the La Mata property is occupied year-round or seasonally, and what must be stored. Photographs and rough dimensions are enough to start.