Solutions for every room
Wardrobes, kitchens, living rooms, bedrooms, bathrooms and workspaces adapted to the actual home.
MMV Studio
Custom furniture in Torreta Florida, Torrevieja
We can assist you inEspañolEnglishDeutschРусский
Furniture planned for the room you actually have
In Torreta Florida we can assess a space that a standard cabinet will not fit: beneath stairs, beside a column or close to a door. First decide what must remain reachable.
Designed for your space
Bespoke furniture designed for your home in Torreta Florida
Front and side photographs help with an initial view. We then measure slopes, skirtings, services and delivery access before making the components. We confirm the measured survey, access, delivery and fitting before manufacture.
Design adapted to the property
We check walls, columns, services, walkways and proportions before defining the furniture.
Materials recomendados
Your project manager recommends substrates, finishes and hardware suited to the use, maintenance and budget.
Measuring and fitting in Torreta Florida
We coordinate the technical visit, delivery, installation, adjustments and final check in the area.
Our process
From enquiry to fitted furniture in Torreta Florida
The measurements and the agreed specification turn an initial price range into a final quote. Design and project work are free when you commission us to make the furniture to that project.
A first price range
Photographs, rough sizes and your address let us discuss the scope. The figure remains provisional until we measure.
Survey at the property
We check the actual openings, services, wall lines and the route for bringing the pieces in.
Design where needed
If plans are needed, we develop them after the survey. The design and project are free when you commission us to make the furniture to that project.
The detailed quote
We set out the agreed layout, boards, fronts, fittings, delivery and any installation included in the order.
Your approval and deposit
You can check the full proposal before accepting it. Production begins after the agreed advance payment.
Workshop manufacture
The pieces are made to the approved measurements and specifications, with the agreed hardware prepared for fitting.
Delivery and fitting
We carry out the transport and installation specified in your order, then adjust the parts we have fitted.
Walk-through together
We test doors and drawers with you, record any outstanding details and close the job once the agreed result is confirmed.
Your project starts here
Tell me what you want to change at home.
I'm Lorena Peña. You don't need to know the technical name for the furniture. Describe the problem in your own words and add a photo if you can; I'll help you work out the next step.
No obligation. Rough measurements are enough to get started.
Solutions for your space
Using an awkward space without closing off access
An irregular corner does not need a door following every angle. A simpler front can give better access and more useful storage.
Under stairs
Separate the useful high section from the harder-to-reach low part.
Wall with a column
A level front may hide the obstruction while the interior respects it.
Work corner
Fit desk, cables and storage around the available passage.
Space beside a door
Check the handle and swing before choosing cabinet depth.
Latest posts
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Configuration gallery
Custom furniture projects for homes in Torreta Florida
Twelve project types showing different layouts, finishes and ways to integrate the furniture into a real room.
Wardrobes and dressing roomsStorage planned around the opening, wall and required capacity
Custom kitchensLayout and equipment coordinated with the services
Living and dining roomsIntegrated storage, media and display compositions
BedroomsHeadboards, wardrobes and occasional furniture designed together
Bathrooms and utility roomsDurable solutions that are straightforward to maintain
High-capacity wardrobeAn internal layout organised around daily routines
Kitchen with additional storageTall units, work zones and appliances planned together
Media wallCabling, ventilation and storage integrated into the elevation
Practical hallway furnitureA landing surface, seating and storage fitted to the entrance
Interior joineryDoors, wall panelling and junctions aligned with the home
Home officeDesk space, filing and connections resolved in one scheme
Commercial solutionDurable furniture for a workplace or customer-facing area
Specific information
Before covering a difficult wall
We need to know what sits behind the proposed unit and what must come out of it without a struggle.
Sizes at several points
Note width and height at different distances where the ceiling slopes.
Obstacle photographs
Include skirtings, beams, consumer units and sockets.
Purpose of the space
Storage, work and display call for different interiors.
Delivery route
Check whether sections pass through doors and stairways.
Three ways to approach the specification
Where to focus the budget
These are priorities to discuss, rather than fixed packages or price bands.
Everyday function01
Start with the essentials
Give priority to a workable layout, useful capacity and suitable hardware.
- A clearly defined scope
- A focused choice of finishes
- Storage arranged for daily use
Personal detail02
Refine the visible finish
Compare additional finishes and internal accessories where they improve the result.
- Coordinated visible surfaces
- Accessories chosen for a purpose
- Samples for the finishes that matter
Special requirements03
Resolve the unusual details
Allow for additional design or workshop work when geometry, equipment or junctions require it.
- Detailed technical information
- Specific fixings or mechanisms
- Coordination with the relevant trades
A detailed quotation
What we need to quote for your bespoke furniture in Torreta Florida accurately
You can start with rough dimensions. We will tell you what needs to be checked before a final specification is prepared.
The space
Photographs and approximate dimensions show the available area and nearby doors or services.
Your priorities
Explain what you need the furniture to do and what is missing now.
Your references
Send a few examples and point out the details you like.
Timing and access
Tell us the address, intended date and any work taking place before fitting.
From early guidance to a final figure
From enquiry to a confirmed proposal
01First review
We assess the information, clarify the scope and identify missing details. This enquiry does not generate an automatic price.
02Detailed quotation
The proposal sets out the agreed design, specification, price and fitting conditions after the necessary checks.
Send what you already have. We can identify the next useful photograph, measurement or decision.
Send photographs and dimensions →
Materials and details
We help you choose the right furniture materials in Torreta Florida
A surface, its supporting board, edges and hardware need to work together.
Product-specific performance and care instructions are checked against the selected specification.
The next step
Let's talk through the details.
If an option has caught your eye, send it with a photo of your home. I'll explain what information we need to consider whether it suits your space.
Scope and terms are confirmed before you place an order.
Local questions
Questions before you enquire
Can the whole space under stairs be closed?＋
That depends on services and the access they require. We check before drawing the doors.
Will you measure the slope?＋
Yes. We take dimensions at several points and inspect the floor and skirting too.
Can a straight front sit before a column?＋
Often it can, with an adapted interior. We check the usable capacity before choosing it.
When is furniture made?＋
After final dimensions, any needed design, materials and the definitive quote are agreed.
Your project starts here
Send the details you have
Send the address in Torreta Florida, photographs and the furniture you need. We will confirm coverage and what information is needed next.
- 01 Initial reply and feasibility review
- 02 Suggested next step
- 03 A detailed quotation antes de fabricar
Awkward spaces in Torreta Florida do not need awkward furniture
Under a staircase or beside a column, copying every angle can leave unusable compartments. We first locate the obstruction and list what the storage must hold, then decide where a clean line will work better.
Leave access where it is needed
Valves, sockets or other services behind a panel may need attention later. Removable parts or an opening are planned rather than sealing them behind a continuous front.
Use the height that is really there
A low run suits different objects from a tall one. We size its areas for shoes, cleaning items or larger belongings instead of repeating equal shelves.
Allow for the actual walls
Floor, ceiling and wall lines may not be straight. A measured survey lets us specify tolerances and scribed finishing pieces before the drawing goes to the workshop.
Send wide photographs of the Torreta Florida space, what sits behind it and what you hope to store. We will review those details before dividing it into modules.