Solutions for every room
Wardrobes, kitchens, living rooms, bedrooms, bathrooms and workspaces adapted to the actual home.
MMV Studio
Custom furniture in Centro, Torrevieja
We can assist you inEspañolEnglishDeutschРусский
Furniture planned for the room you actually have
For furniture in central Torrevieja, send the street, floor level and pictures of the route from the entrance. A kitchen or wardrobe may fit the room but still need smaller parts to be brought upstairs and assembled.
Designed for your space
Bespoke furniture designed for your home in Centro
The visit checks both the recess and the delivery route. If the apartment is being refurbished, tell us which walls, floors or services will still change before workshop dimensions are fixed. We confirm the measured survey, access, delivery and fitting before manufacture.
Design adapted to the property
We check walls, columns, services, walkways and proportions before defining the furniture.
Materials recomendados
Your project manager recommends substrates, finishes and hardware suited to the use, maintenance and budget.
Measuring and fitting in Centro
We coordinate the technical visit, delivery, installation, adjustments and final check in the area.
Our process
From enquiry to fitted furniture in Centro
The measurements and the agreed specification turn an initial price range into a final quote. Design and project work are free when you commission us to make the furniture to that project.
A first price range
Photographs, rough sizes and your address let us discuss the scope. The figure remains provisional until we measure.
Survey at the property
We check the actual openings, services, wall lines and the route for bringing the pieces in.
Design where needed
If plans are needed, we develop them after the survey. The design and project are free when you commission us to make the furniture to that project.
The detailed quote
We set out the agreed layout, boards, fronts, fittings, delivery and any installation included in the order.
Your approval and deposit
You can check the full proposal before accepting it. Production begins after the agreed advance payment.
Workshop manufacture
The pieces are made to the approved measurements and specifications, with the agreed hardware prepared for fitting.
Delivery and fitting
We carry out the transport and installation specified in your order, then adjust the parts we have fitted.
Walk-through together
We test doors and drawers with you, record any outstanding details and close the job once the agreed result is confirmed.
Your project starts here
Tell me what you want to change at home.
I'm Lorena Peña. You don't need to know the technical name for the furniture. Describe the problem in your own words and add a photo if you can; I'll help you work out the next step.
No obligation. Rough measurements are enough to get started.
Solutions for your space
The route into the apartment matters
Entrance doors, corridor turns and lifts can set component sizes. Inside the room, the clearance with drawers open guides the layout.
Kitchen with a narrow passage
Test oven, dishwasher and drawers in their open positions on the plan.
Bedroom wardrobe
Measure the front and free space before choosing doors and internals.
Living-room wall
Arrange the screen and cables without occupying the main route.
Compact bathroom
Keep waste, valves and floor cleaning accessible.
Latest posts
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Configuration gallery
Custom furniture projects for homes in Centro
Twelve project types showing different layouts, finishes and ways to integrate the furniture into a real room.
Wardrobes and dressing roomsStorage planned around the opening, wall and required capacity
Custom kitchensLayout and equipment coordinated with the services
Living and dining roomsIntegrated storage, media and display compositions
BedroomsHeadboards, wardrobes and occasional furniture designed together
Bathrooms and utility roomsDurable solutions that are straightforward to maintain
High-capacity wardrobeAn internal layout organised around daily routines
Kitchen with additional storageTall units, work zones and appliances planned together
Media wallCabling, ventilation and storage integrated into the elevation
Practical hallway furnitureA landing surface, seating and storage fitted to the entrance
Interior joineryDoors, wall panelling and junctions aligned with the home
Home officeDesk space, filing and connections resolved in one scheme
Commercial solutionDurable furniture for a workplace or customer-facing area
Specific information
Useful photographs before a visit
An image of the old furniture helps, but we also need to see doorways and the route to the room.
Entrance and lift
Show the doorway and give the floor level; the route affects how parts are divided.
Doors inside the home
Photograph open leaves and tight passages, not just the final recess.
Building work in progress
Tell us who is moving walls or services and when those changes finish.
Pieces being kept
Existing floor, table or bed helps set proportions and colour.
Three ways to approach the specification
Where to focus the budget
These are priorities to discuss, rather than fixed packages or price bands.
Everyday function01
Start with the essentials
Give priority to a workable layout, useful capacity and suitable hardware.
- A clearly defined scope
- A focused choice of finishes
- Storage arranged for daily use
Personal detail02
Refine the visible finish
Compare additional finishes and internal accessories where they improve the result.
- Coordinated visible surfaces
- Accessories chosen for a purpose
- Samples for the finishes that matter
Special requirements03
Resolve the unusual details
Allow for additional design or workshop work when geometry, equipment or junctions require it.
- Detailed technical information
- Specific fixings or mechanisms
- Coordination with the relevant trades
A detailed quotation
What we need to quote for your bespoke furniture in Centro accurately
You can start with rough dimensions. We will tell you what needs to be checked before a final specification is prepared.
The space
Photographs and approximate dimensions show the available area and nearby doors or services.
Your priorities
Explain what you need the furniture to do and what is missing now.
Your references
Send a few examples and point out the details you like.
Timing and access
Tell us the address, intended date and any work taking place before fitting.
From early guidance to a final figure
From enquiry to a confirmed proposal
01First review
We assess the information, clarify the scope and identify missing details. This enquiry does not generate an automatic price.
02Detailed quotation
The proposal sets out the agreed design, specification, price and fitting conditions after the necessary checks.
Send what you already have. We can identify the next useful photograph, measurement or decision.
Send photographs and dimensions →
Materials and details
We help you choose the right furniture materials in Centro
A surface, its supporting board, edges and hardware need to work together.
Product-specific performance and care instructions are checked against the selected specification.
The next step
Let's talk through the details.
If an option has caught your eye, send it with a photo of your home. I'll explain what information we need to consider whether it suits your space.
Scope and terms are confirmed before you place an order.
Local questions
Questions before you enquire
Must I show the entrance?＋
For an initial enquiry, describe the floor and lift. Before production or delivery we check the actual route.
Can you survey during a refit?＋
We can discuss the idea, but production sizes are confirmed when changes affecting the cabinet have been settled.
Can a large cabinet arrive in sections?＋
It depends on design, visible joins and access. Lift dimensions alone do not decide the construction.
How is fitting priced?＋
The final offer names transport, access, fixing and agreed work. We need the address and furniture brief to assess it.
Your project starts here
Send the details you have
Send the address in Centro, photographs and the furniture you need. We will confirm coverage and what information is needed next.
- 01 Initial reply and feasibility review
- 02 Suggested next step
- 03 A detailed quotation antes de fabricar
In central Torrevieja, the delivery route is part of the furniture plan
A unit that fits a bedroom still has to pass through the building. The entrance, stairs, lift and corridor turns can determine whether a large run is made as one piece or assembled from smaller modules.
Photograph the route in
Pictures of the room alone leave out the awkward part. We check door clearances and the journey from the street before fixing transport and installation details.
Put everyday storage within reach
Height is useful only when the contents can be reached and the fronts can open. We position daily items lower down and test the drawers against the bed or table that will stay.
Agree fitting in the quote
The written scope should cover the pieces, access, protection and fitting requested. Any other work needed at the property is identified before workshop dates are committed.
Share the street, floor and photographs of the route to the room. They will help us arrange a useful survey in central Torrevieja.