Actual footwear
Tall and large pairs are measured before shelves are set.
MMV Studio
Custom shoe storage in Torrevieja
We can assist you inEspañolEnglishDeutschРусский
Furniture planned for the room you actually have
Shoes do not all fit the same depth. A fitted shoe cabinet in Torrevieja is planned around everyday pairs, boots and footwear stored between seasons. We also think about the pair brought home wet or sandy.
Designed for your space
A proposal that fits your space
We define dimensions, storage, finishes and fitting before manufacture so every decision suits the actual space and its use.
Ventilation
The cabinet should not trap moisture or odour.
Daily reach
Frequent pairs stay available rather than behind others.
Clear entrance
Front door, passage and a place to put shoes on are checked.
Our process
From the first estimate to your final check
The measurements and the agreed specification turn an initial price range into a final quote. Design and project work are free when you commission us to make the furniture to that project.
A first price range
Photographs, rough sizes and your address let us discuss the scope. The figure remains provisional until we measure.
Survey at the property
We check the actual openings, services, wall lines and the route for bringing the pieces in.
Design where needed
If plans are needed, we develop them after the survey. The design and project are free when you commission us to make the furniture to that project.
The detailed quote
We set out the agreed layout, boards, fronts, fittings, delivery and any installation included in the order.
Your approval and deposit
You can check the full proposal before accepting it. Production begins after the agreed advance payment.
Workshop manufacture
The pieces are made to the approved measurements and specifications, with the agreed hardware prepared for fitting.
Delivery and fitting
We carry out the transport and installation specified in your order, then adjust the parts we have fitted.
Walk-through together
We test doors and drawers with you, record any outstanding details and close the job once the agreed result is confirmed.
Your project starts here
Tell me what you want to change at home.
I'm Lorena Peña. You don't need to know the technical name for the furniture. Describe the problem in your own words and add a photo if you can; I'll help you work out the next step.
No obligation. Rough measurements are enough to get started.
Solutions for your space
Narrow hallway
Pull-out trays reveal the back; tilting fronts save depth in a hall but limit size and height. Whether open or closed, the furniture needs ventilation and a cleanable interior.
Narrow hallway
Shallow or tilting fronts are tested with the real shoe sizes.
Inside a wardrobe
Adjustable shelves separate daily pairs from seasonal ones.
Walk-in storage
Visible trays prevent shoes being lost at the back.
Seat for changing shoes
A bench offers support above low everyday storage.
Latest posts
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Configuration gallery
Examples of custom shoe storage
Sixteen configurations showing different layouts, finishes and ways to integrate the furniture into a real room.
Tilting hall frontsThe doors need little forward swing.
Bench for changing shoesLow compartments sit below the seat.
Shoes inside the wardrobeClothing and footwear share an ordered front.
Draw-out traysPairs at the back come within reach.
Narrow tall unitHeight makes use of a slim opening.
Storage below the stairEach level follows the available headroom.
Rotating dressing-room storeMore pairs appear as the unit turns.
Mesh doorsAir can pass behind closed fronts.
Room for family bootsA taller shelf prevents shafts being folded.
Angled accessible shelvesFootwear stays visible at a comfortable angle.
Entry divider with shoesOne piece screens the room and stores pairs.
Pale oakA quiet finish frames simple storage.
Framed traditional frontsThe cabinet sits easily among older details.
Holiday-let durabilityCleaning and self-evident access matter most.
Dressing-room islandShoes occupy drawers below the upper surface.
Lit walnut storageLighting helps select a pair without using shelf space.
Three ways to approach the specification
Where to focus the budget
These are priorities to discuss, rather than fixed packages or price bands.
Everyday function01
Start with the essentials
Give priority to a workable layout, useful capacity and suitable hardware.
- A clearly defined scope
- A focused choice of finishes
- Storage arranged for daily use
Personal detail02
Refine the visible finish
Compare additional finishes and internal accessories where they improve the result.
- Coordinated visible surfaces
- Accessories chosen for a purpose
- Samples for the finishes that matter
Special requirements03
Resolve the unusual details
Allow for additional design or workshop work when geometry, equipment or junctions require it.
- Detailed technical information
- Specific fixings or mechanisms
- Coordination with the relevant trades
A detailed quotation
The information behind a useful quotation
You can start with rough dimensions. We will tell you what needs to be checked before a final specification is prepared.
The space
Photographs and approximate dimensions show the available area and nearby doors or services.
Your priorities
Explain what you need the furniture to do and what is missing now.
Your references
Send a few examples and point out the details you like.
Timing and access
Tell us the address, intended date and any work taking place before fitting.
From early guidance to a final figure
From enquiry to a confirmed proposal
01First review
We assess the information, clarify the scope and identify missing details. This enquiry does not generate an automatic price.
02Detailed quotation
The proposal sets out the agreed design, specification, price and fitting conditions after the necessary checks.
Send what you already have. We can identify the next useful photograph, measurement or decision.
Send photographs and dimensions →
Materials and details
Choose the specification as a whole
A surface, its supporting board, edges and hardware need to work together.
Product-specific performance and care instructions are checked against the selected specification.
The next step
Let's talk through the details.
If an option has caught your eye, send it with a photo of your home. I'll explain what information we need to consider whether it suits your space.
Scope and terms are confirmed before you place an order.
Before deciding
Questions before you enquire
Will a tilting cabinet hold boots?＋
Not always. Mechanism and depth restrict height; boots often need their own tall section.
Should it be fully closed?＋
It can be, provided airflow and cleaning suit the footwear stored.
How many pairs will fit?＋
We count using shoe size, type and shelf system rather than exterior width alone.
Your project starts here
Send the details you have
We will review your enquiry and contact you to clarify the scope and next steps. Sending this form does not place an order.
- 01 Initial reply and feasibility review
- 02 Suggested next step
- 03 A detailed quotation antes de fabricar